Optical ground slip angle sensor.
The FooBarEngineering CAN-SLIP-ANGLE is based on the proven WSL range of loggers and designed to interface to the CAN bus.
The unit is housed in a lightweight enclosure with integrated automotive connector.
The CAN-SLIP-ANGLE measures ground position using a downward facing camera to watch the floor. It measures X-Y position by tracking features in the image.
The sensor produces an angle that the camera is moving relative to the ground whilst also producing a speed measurements in the X and Y direction.
The CAN can be defined to include any of the available data via the usb interface, but as standard its compatible with the MoTeC, Cosworth range of dashes and loggers.
|10Vdc to 18Vdc
|Reverse and over voltage
|1000mA @ 12V
|Temperature Range Operating
|-30°C to +60°C
|Temperature Range Storage
|-20°C to +70°C
|1Mbit, 512k, 256k, 128k software selectable, with 120 ohm selectable termination
|1x GPS SMA
|For connection to active GPS antenna
1x USB (Debug use only) RS232 terminal for setup and in use testing/ offloading of data.